How to rotate phase of wav sample at 45 degrees

[Dimmak0001]

Plese help me to find answer.

[Warmonger]

You know, degrees are related to signal frequency. It can be sampling frequency (which wouldn't make much sense then) or a certain sound in that sample. What do you exactly want to do?

[martinvicanek]

Do you mean something similar to a Hilbert transformer (=a device which generates a 90 degree phase shift over a wide frequency band)? But why 45 degrees?

[Dimmak0001]

I just want to rotate phase of wav sample around 'circle'( formula with 3.14 ). Not shift, but rotate to any degree from 0 to 180.

[Warmonger]

I ask what you mean by "phase of sample". Samples have no phase parameter as far as I know.

[Dimmak0001]

I ask what you mean by "phase of sample". Samples have no phase parameter as far as I know.

Sorry... Wav section. Phase of frequency

[Warmonger]

Phase of which frequency?

[Dimmak0001]

Phase of which frequency?

phase of wave.

[Warmonger]

If you want just to delay it by 1/8 of period (or wrap around), it shouldn't be hard, assuming you can have buffer long enough.

I don't think this could be of any use, though.

[treacherousumbrella]

The delay time related to a 45 degree shift will be different for each frequency, proportional to the wavelength of that frequency. Shifting a harmonically rich waveform by 45 degrees requires a different delay time for each frequency present. You may want to look into both the Hilbert transform and allpass filter. It's not as simple as you might think unless you are talking about phase shifting a sine wave, in which case the delay time for a 45 degree phase shift can be easily calculated from the wavelength

[Warmonger]

Hilbert transform is quite different, as these are only two SINE waves which are shifted by 90 degrees.

You may try to google for "phase correction", however that's advanced topic and it will be hard to find something free and usable.

[Dimmak0001]

...unless you are talking about phase shifting a sine wave, in which case the delay time for a 45 degree phase shift can be easily calculated from the wavelength

Yes, please. How to calculate in that case?

[treacherousumbrella]

Sample rate / frequency(Hz) = Number of samples per cycle
360 degrees / 45 degrees = 8
Number of samples per cycle / 8 = Delay time in samples for a 45 degree shift at the frequency of the input sinusoid

[MegaHurtz]

I just want to rotate phase of wav sample around 'circle'( formula with 3.14 ). Not shift, but rotate to any degree from 0 to 180.

180 degree is easy just invert :P
But a typical alpass has the same kind of 180 phase shift. So basically its a paradox :/.
But you could go around messing the signal and cpu up using a hilbert transform. Personally i`d just use it for single sideband modulation. I agree for practical applications a delay is a good solution for phase issues.
If that was what was said when i was skipping over the text, else ^^.
For a practical solution.

[Warmonger]

Compute the offset as sampleSize * (phaseShift / 360), then just copy elementar samples in loop.

or just strat playback at offset and wrap it when it reaches sample's end, if you wnat to create a sampler.